COMPASS
ATOM 7HV Ultimate
The 7HV is a completely
new design. This 700 electric helicopter is equipped with innovative features
like an automatic belt tensioner, sliding battery tray, which make the quick
change of batteries very easy, and a thrust bearing, which protects the ball bearings
of the drive.
The helicopter has been
designed by Sebastian Zajonz, who incorporated many years of experience in
the design. This design avoids unnecessary complexity. Thus, the 7HV no push
/ pull servo linkages, and it has a relatively low parts
count.
The single-stage
transmission with large diameter and 1.0 module gear takes the punishment of
the strongest motors and provides an efficient transmission.
Direct servo-to-swash
linkages are equal length and have linear movement. Angle-error and uneven
movement found on many other products can limit
performance, and is therefore eliminated.
With the future in mind,
the swash plate and rotor head geometry was optimized for flybarless.
All servos, the speed
controller and the motor have been placed at the height of the tail boom and
the battery is very close to center of gravity.
This arrangement ensures a
very high center of gravity, which increases the performance, so the 7HV can
achieve efficient maneuverability and utilize the flybarless systems fully,
yielding great results.
|
PRICE
RM: 2,850.00
Length: 1372mm
Height: 403mm
Rotor
diameter: 1560mm
Motor pinion: 13T
Gear ratio: 13T:
10.46:1:4.8
Takeoff weight: ca. 4.3 -
5.1kg
Motortype: Brushless
Outrunner
Battery size: LiPo
mit 12S (2 x 6S) 4000-6000mAh
Rotor blade
size: 690-710mm
|
RCHobbyZone
COMPASS Atom 7HV Ultimate
COMPASS Atom 6HV Ultimate
COMPASS
ATOM 6HV Ultimate
The 6HV Ultimate is the consistent further
development of the old 6HV. The
details make the model maintenance- and assembly-friendly or are for a better
flight-performance. The 6HVU has got a third bearing block and the screws of
the arm links were enlarged from M3 to M4 diameter. Aluminium brackets are
mounted into the carbon side frames so the assembly of the servos is fast and
easy and the ESC got his own mount. Some fixing points for the wires are
milled into the new two-part side frames. This reduces the cost in case of an
crash and makes the helicopter easy to fix. The tail is widely used from the
7HV Ultimate and got an aluminium tail control arm, a 6mm tail shaft,
reinforced tail blade grips and a stainless tail center hub. The most
distinctive features are the new canopy leant to the design of the Warp360
and the new 25mm tail boom. The automatic belt tensioner first used in the
7HV is also used in the 6HV Ultimate. Much more details like the notches for
the Velcro tapes, the head button, the canopy quick-releases, a new motor
mount, the carbon fiber tail control rod and a new high-quality, helical
delrin main gear make a perfect overall package. Get inspired by the all new
6HVU design!
|
PRICE
RM: 2,100.00
Kit Contain
Atom 6HV Ultimate
615mm Carbon Blades
HV Brushless Motor 540KV
10T Pinion
Blade-Caddy
Available kits:
1. Complete Kit like shown above w.
Motor and ESC.
2. Kit with Carbon Blades and Motor, without ESC. 3. Kit with Carbon Blades. |
COMPASS Atom 550 Ultimate
COMPASS
ATOM 550 Ultimate
The 550
Ultimate is the consistent further development of the 6HV Ultimate. The
details make the model maintenance- and assembly-friendly or are for a better
flight-performance. The 550U has got a third bearing block and the screws of
the arm links are M4 diameter. Aluminium brackets are mounted into the carbon
side frames so the assembly of the servos is fast and easy and the ESC got
his own mount. Some fixing points for the wires are milled into the new
two-part side frames. This reduces the cost in case of an crash and makes the
helicopter easy to fix. The tail is widely used from the 7HV Ultimate and got
an aluminium tail control arm, a 6mm tail shaft, reinforced tail blade grips
and a stainless tail center hub. The most distinctive features are the new canopy
leant to the design of the Warp360 and the new 25mm tail boom. The automatic
belt tensioner first used in the 7HV is also used in the 550 Ultimate. Much
more details like the notches for the Velcro tapes, the head button, the
canopy quick-releases, a new motor mount, the carbon fiber tail control rod
and a new high-quality, helical delrin main gear make a perfect overall
package. Get inspired by the all new 550U design!
|
PRICE
RM: 1,950.00
Kit
Contain
Atom 550 Ultimate
CFK Rotor-Blades 550mm
Motor 1250 KV
12T Pinion
Blade-Caddy
Available kits:
1. Complete Kit like shown above w.
Motor and ESC.
2. Kit with Carbon Blades and Motor, without ESC. 3. Kit with Carbon Blades. |
Subscribe to:
Posts (Atom)